Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Adjust the lifting arms so that the vehicle is positioned with its center of gravity in the middle between
the supports. Adjust the height of the lifting plates so that they reach the lifting points specified by the
manufacturer; if necessary, use the required lifting plate adapters.
Attention
Observe the maximum height of 250 mm or the maximum height of a support plate
adapter.
Lifting the vehicle
1. Switch on the main switch of the lift.
2. Raise the vehicle by pressing the "Lift" button until the vehicle is raised to a height of 100-150 mm.
3. Check again that the vehicle is secure and that all locking bolts are engaged.
4. Always ensure that the safety devices are activated before attempting to work on or near the vehicle.
Parking position
1. The safety catch engages automatically from a height of 500 mm.
2. Press the Park button to lower the lift to the next notch. Ensure a uniform height.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
134
Release date: 26.01.2024 / Product manufacturer ATH-Heinl GmbH & Co. KG
Werbung
