Next Level Racing FLIGHT SEAT PRO Montageanleitung Seite 20

support@nextlevelracing.com
A)
25
A) Align the mounting holes on the Centre Pole Bracket with the mounting slots and inserts on the Centre Pole Mount.
B) Bolt through and secure with 2 x M8 Knobs and Washers & 1 x M8 Bolt, Ny-lock Nut and Washer.
A)
26
A) Align the threaded inserts and slots on the HOTAS Angle Bracket with the mounting slots on the Centre Pole Bracket.
B) Bolt through and secure with 1 x M8 Bolt, 2 x M8 Shoulder Bolts, 1 x Washer and Flange Nut.
A)
A) Install the Seat Bottom Cushion previously uninstalled in Step 24.
27
B) Align the mounting holes on the HOTAS Plate with the threaded inserts on the HOTAS Angle Bracket. Bolt
through and secure with 2 x M8 Bolts.
B)
B)
B)
20
PARTS:
• • 1 x Centre Pole Bracket
• • 1 x M8 60mm Sockethead Bolt
• • 2 x M8 12mm Knobs
• • 3 x M8 Washers
• • 1 x M8 Ny-lock Nut
PARTS:
• • 1 x HOTAS Angle Bracket
• • 1 xM8 55mm Sockethead Bolt
• • 2 x M8 Shoulder Bolts
• • 1 x M8 Washer
• • 1 x M8 Flange Nut
PARTS:
• • 1 x HOTAS Plate
• • 2 x M8 16mm Countersunk Bolts