Herunterladen Diese Seite drucken

Stihl RMA 248.3 T Gebrauchsanleitung Seite 48

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
English
► Move the lawn mower to the desired position
by raising and lowering the lever.
The current cutting height can be read off at
cutting height indicator (3) by means of mark‐
ing (4).
► Release lever (2).
The lawn mower engages.
12.3
Mowing and Mulching
The lawn mower is equipped with a multi-blade
and can be used for mowing or mulching.
► If working with self-propulsion engaged: drive
the lawn mower forwards in a controlled man‐
ner.
► If working with self-propulsion disengaged:
push the lawn mower forwards slowly and in a
controlled manner.
► If a foreign object is hit during mowing and the
blade is blocked:
► Switch the lawn mower off and remove the
battery.
► Make sure that all moving parts have come
to a complete stop.
► Check the lawn mower.
► If repairs are required: consult a STIHL spe‐
cialist dealer.
► If the lawn mower begins to vibrate strongly:
► Switch the lawn mower off and remove the
battery.
► Check the lawn mower.
► Check that all nuts, bolts, screws and pins
are tight.
► If repairs are required: consult a STIHL spe‐
cialist dealer.
For optimum performance, note the recommen‐
ded temperature ranges,
48
20.7.
12.4
Emptying the Grass Catcher
Box
The flow of air generated by the blade raises
level indicator (1). The flow of air stops when the
grass catcher box is full. If the flow of air is too
low, level indicator (2) returns to its resting state.
This is a prompt to empty the grass catcher box.
The functionality of the level indicator is restric‐
ted if the flow of air is impaired. External influen‐
ces such as wet, dense or high grass, low cutting
levels, dirt or the like can impair the flow of air
and the functionality of the level indicator.
► If the level indicator drops to its resting state:
empty the grass catcher box.
► Switch the lawn mower off.
► Detach the grass catcher box.
► Open tab (1).
► Open and hold upper part of grass catcher
box (2) by handle (3).
► Hold lower handle (4) with the second hand.
► Empty the grass catcher box.
► Close the grass catcher box.
► Attach the grass catcher box.
13 After Finishing Work
13.1
After Finishing Work
► Switch the lawn mower off and remove the
battery.
► If the lawn mower is wet: allow it to dry.
► If the battery is wet or damp: allow it to dry,
20.7.
► Clean the lawn mower.
► Clean the battery.
13 After Finishing Work
0478-131-9805-A

Werbung

loading

Diese Anleitung auch für:

Rma 253.3 t