HBM RTN/M2LAR Montageanleitung Seite 9

General
The weighing modules have been primarily designed for use in tank weighing.
As a rule, the weighing modules are equipped with adjustable limit stops that
limit horizontal movements, for example by wind forces or in mixer operation.
In addition, the modules are provided with a anti‐liftoff device which prevents
the tank from lifting off. However, ensure that the specified data (see chapter 7
on page 22) are not exceeded.
The modules comprise a lower module plate for mounting on the basic
construction (foundations), a load cell dummy with load introduction elements
and the upper module plate for tank mounting. For load introduction into the
load cell, a rubber‐metal bearing (with RTN/M2LA) or a pendulum bearing (with
RTN/M2LB) is used which allows for horizontal shifting of the load applied. The
weighing modules are completely fitted with a load cell dummy that can be
loaded, with a ground cable, and a securing device for transport.
RTN/M2... 7
A01867_02_YS0_02 HBM: public