HBM RTN/M2LAR Montageanleitung Seite 6

Safety instructions
considerations of weighing technology in such a way as to minimise residual
dangers. Prevailing regulations must be complied with at all times. There must
be reference to the residual dangers connected with weighing technology.
Environmental conditions
In the context of your application, please note that all materials which release
chlorine ions will attack all grades of stainless steel and their welding seams. In
such cases the operator must take appropriate safety measures.
With environmental conditions that cannot be clearly defined, HBM recom­
mends to provide the load cells and weighing modules with a protective coating
which matches these conditions (after mounting) in order to prevent the influ­
ence of aggressive media. Please take into account the resistance of the cable
material and the mounting parts.
Prohibition of own conversions and modifications
The weighing modules must not be modified from the design or safety
engineering point of view except with our express agreement. Any modification
shall exclude all liability on our part for any damage resulting therefrom.
Qualified personnel
These weighing modules are only to be installed by qualified personnel strictly
in accordance with the specifications and with the safety rules and regulations
which follow. It is also essential to observe the appropriate legal and safety
regulations for the application concerned. The same applies to the use of
accessories.
Qualified personnel means persons entrusted with the installation, fitting,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
Accident prevention
Although the specified brealing load is several times the full scale value, the
relevant accident prevention regulations from the trade associations must be
taken into consideration.
4 RTN/M2...
A01867_02_YS0_02 HBM: public