Disposal And Recycling; Troubleshooting Guide - Scheppach GSE40S Originalbetriebsanleitung

• Always check that the shredder and especially the
guards are not worn down or damaged but firmly at-
tached before use. Check that the nuts, bolts and
screws are tight.
• Check the covers and guards for damage and improp-
er attachment. If necessary, change the components
• Keep the shredder in a dry place out of children's
reach. Do not cover the shredder in nylon bags, as
moisture may develop.

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment
and its accessories are made of various types of mate-
rial, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your
dealer or your local council.

Troubleshooting guide

Fault
Motor does not start
Garden waste is not drawn in.
Shredding material is tangled.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Possible causes
a) Collection box not in correct position
b) Motor is overloaded.
c) No electricity
a) Blade cylinder rotates anti-clockwise.
b) No electricity
c) Blade cylinder has become blocked.
a) Counter blade is not set correctly.
Rectification
a) Insert the collection box correctly and check
the locking device (see Commissioning).
b) Turn the shredder on again (see Commissi-
oning).
c) Have the socket, cable, lead and plug che-
cked by a trained electrician (see Electric
connection).
a) Change the rotational direction (see Com-
missioning).
b) Push shredding material with special
pushing device for shredder.
c) Remove blockage (see Commissioning).
a) Re-adjust counter blade (see Commissio-
ning).
19 І 32