Safety Information - Scheppach GSE40S Originalbetriebsanleitung

Leisehäcksler

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

we hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specified,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advantage

of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only

be operated by persons who were instructed concern-

ing the operation of the machine and who are informed

about the associated dangers. The minimum age re-

quirement must be complied with.

In addition to the safety notices contained in this op-

erating manual and the particular instructions for your

country, the generally recognised technical regulations

for the operation of identical devices must be complied

with.

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

Device Description (Fig 1-3)

Wheels

Collector box

Locking device

Power supply

Transport handle

Reset switch

On / Off switch

Switch to change rotational direction of the cylinder

Adjustor screw

10. Chassis

11. Supports

Side protection left

Side protection right

Washer 9 mm

Button screw

Hexagonal nut M8

Washer 20 mm

Spacer sleeve

Hexagon screw M8

Hubcap

Unpacking

• Open the packaging and remove the device carefully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty pe-

riod has expired.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, film and small parts! There is a risk of swal-

lowing and suffocation!

Intended use

The shredder is intended for compacting fibrous and

wood-related materials such as hedge and tree cut-

tings, branches, bark and pine cones.

Any use not expressly permitted in this manual may

damage the shredder and pose a serious danger to

the user.

Do not fell the shredder with stones, glass, metal,

bones, plastics or fabrics.

The operator or user is responsible for accidents and

injury or damage to third parties.

The manufacturer will not be held responsible for any

damage caused by improper operation or use beyond

the purpose intended.