Operation For Each Axis - Sony LY51 Bedienungsanleitung

7-3-5.

Operation for each axis

When there are two input scale axes, the LY51 performs presetting and resetting operation for the addition/subtraction results.
1st axis + 2nd axis:
1st axis – 2nd axis:
2nd axis – 1st axis:
1st and 2nd axes independent: 1st axis = preset,
Therefore, use this function to perform operations separately for each axis. (This operation cannot be selected for the 1st axis
only or 2nd axis only input settings.)
(Continued from 7-3-1.) (P.177)
1. Select "AXIS" and press
Select operation for the 1st axis or the 2nd axis.
2. Select axis and press
Select preset or reset.
3. Select reset and press
The value of only the selected axis is reset.
Select preset and press
Resetting operation is performed for only the selected axis.
Hereafter, operation is the same as in "7-3-2. Presetting
operation". Peak value calculation is also restarted when
this operation is performed.
180
Preset operation
1st axis = preset value, 2nd axis = reset,
1st axis = preset value, 2nd axis = reset,
1st axis = reset,
.
ENTER
.
ENTER
.
ENTER
.
ENTER
Reset operation
1st and 2nd axes both reset
1st and 2nd axes both reset
2nd axis = preset value, 1st and 2nd axes both reset
2nd axis = unchanged, 1st and 2nd axes both reset
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display