• To enter the settings
5. Select the required signal and press
Enters the universal output 1 setting.
(In this case, alarm (ALM) is selected.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
5. Select "End" and press
or press
RESET
Interrupts the universal output signal settings.
(Previous setting contents remain.)
(2) End settings (Continued from P.155.)
3. Select "End" and press
or press
RESET
Ends the universal output signal settings.
156
.
ENTER
ENTER
.
ENTER
.
Main display
Sub-display
(Lights)
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
↓