Sony LY51 Bedienungsanleitung Seite 150

(1) 1st axis (2nd axis) input resolution setting (Continued from P.147.)
3. Select "1SIG" and press
(Select "2SIG" for the 2nd axis.)
The 1st axis input resolution can be set.
4. Press
The resolution changes.
Note The speed at which the display flashes
becomes faster if the resolution is changed for
an automatically set scale unit.
• To enter the settings
5. Set the required resolution and press
The 1st axis resolution is set.
• To interrupt the settings
5. Press .
RESET
Interrupts the input scale resolution setting.
(Previous setting contents remain.)
(2) End settings (Continued from P.147.)
3. Select "End" and press
or press
RESET
Ends the input scale resolution setting.
148
.
ENTER
.
.
ENTER
ENTER
.
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display
Main display
Sub-display