Sony LY51 Bedienungsanleitung Seite 138

• To enter the set code
2. Press while code input table (2) is displayed.
ENTER
Enters the setting contents. (Flashing → Lighted
steadily)
The setting contents light steadily for approximately
2 seconds for confirmation.
When linear compensation is enabled, the settings do
not end and operation shifts to the linear
compensation value input. The input method is the
same as "4-6-8. Linear compensation setting"
(P.151).
• To interrupt the settings
2. Press .
RESET
Interrupts the collective automatic settings.
(Previous setting contents remain.)
136
Main display
Sub-display
(Lights)
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
↓