Sony LY51 Bedienungsanleitung Seite 116

Precautions for connecting the scale
• These are precautions for connecting the scale to the
display unit.
• Since a precision connector is used for this unit, please be
careful connect to the display unit in a gentle way following
the order described below.
Procedure of connecting the cable
1. Insert the adapter of the cable getly to the joint of the unit.
(There is approximately 1 mm/0.039" clearance between
the mounting plate and the backside of the display unit.)
Back-side panel
114
Adaptor mounting plate
Adaptor
2. Push the connector (approximately 1 mm/0.039") until the
mounting plate touches the back-side panel of the display.
Touch tightly
3. Fix the mounting plate using the screws of the removed
cover plate. (Be sure to fix the mounting plate using the
same screws. Using a different type of screw may cause
noise or other problems resulting in misoperation.)
4. Turn on the power of the display unit and make sure if if
operates normally.