Sony LY51 Bedienungsanleitung Seite 129

4 Input scale unit resolution setting
This sets the input scale unit resolution. This item is automatically set for some scale units. See "4-6-6. Input scale unit resolution
setting" (P.147) for details. The resolution of axes not selected in item 2 is automatically set to "None". For example, if 1st axis
only is selected in item 2, the resolution of the 2nd axis is "None".
For individual input:
1st axis: 0.0005
2nd axis: 0.0005
For AUTO input:
• • • • • 0 3 0 3 • • • • • •
* Automatically set scale units are set automatically only when the scale unit is initially connected. If you change the setting value manually
after connection, the setting does not automatically return to the original value.
5 Display resolution setting
This sets the display data resolution. You cannot set a resolution smaller than that set in item 4 above. See "4-6-7. Display
resolution" (P.149) for details.
For individual input:
1st axis: 0.0005
2nd axis: 0.0005
For AUTO input:
• • • • • • • • • 0 3 1 0 3 1
* If you set the display resolution to "None", the display is blank for that axis.
(Yes)
Data for this item changed
Connected
manually after connecting
scale unit set
the scale unit?*
automatically?
(No)
Data for this
(Yes)
Connected
item changed
scale unit set
manually
automatically?
after
connecting
the scale
unit?*
(Yes)
(No)
(No)
"I.rs" and subordinate menu
setting is necessary. (For AUTO
(Yes)
input, set the numbers in the
sixth to ninth digits.)
Same
(No) (Yes)
resolution as
the input
resolution is
used, and the
display
polarity is "+"?
(No)
Setting unnecessary
(Initial value)
Setting unnecessary
(Initial value)
"d.rS" and
subordinate menu
setting is necessary.
(For AUTO input, set
the numbers in the
tenth to fifteenth
digits.)
127