Sony LY51 Bedienungsanleitung Seite 162

• To enter the settings
5. Select the required signal and press
Enters the output signal.
(In this case, 1st axis A/B phase output (Ab.F) is
selected.)
The setting contents light steadily for approximately
2 seconds for confirmation.
• To interrupt the settings
5. Select "End" and press
or press
RESET
Interrupts the A/B phase output settings.
(Previous setting contents remain.)
160
.
ENTER
ENTER
.
Main display
Sub-display
(Lights)
(After approx. 2 sec.)
Main display
Sub-display
Main display
Sub-display
↓