Restarting Operation; Absolute Value Display - Sony LY51 Bedienungsanleitung

7-3-3.

Restarting operation

(Continued from 7-3-1.) (P.177)
1. Select "rST" and press
ENTER
The peak value is cleared and is recalculated from the
current value at that point.
7-3-4.

Absolute value display

(Continued from 7-3-1.) (P.177)
1. Select "ABS" and press
ENTER
The absolute value of the current value appears on the
main display for approximately 2 seconds.
If a resetting or presetting operation is not executed after
passing the zero point, the zero point value will be the same
as the current value (absolute value indication).
Note This value is displayed only and is not output.
.
.
Maximum value, Minimum
Main display
value → Current value
Sub-display
Peak-to-peak value → 0
Main display
(Absolute value)
Sub-display
179