Presetting Operation, Recalling The Preset Value - Sony LY51 Bedienungsanleitung

7-3-2.

Presetting operation, recalling the preset value

This establishes a preset value with respect to the current value selected by the initial settings. Peak value calculation restarts
when the presetting operation is executed. When the presetting operation is executed during 1st and 2nd axis addition/subtraction,
the preset value is as follows.
1 + 2:1st axis = preset value,
1 – 2:1st axis = preset value,
2 – 1:1st axis = reset,
1,2: 1st axis = preset,
To set a preset value for each axis, see "7-3-5. Operation for each axis".
(Continued from 7-3-1.) (P.177)
1. Select "PrS" and press
The preset value input appears on the sub-display.
When recalling the preset value, the previous value
appears. In this case, press
performing the next operation. Operation can also be
interrupted by pressing
(function key) menu.)
2. Press .
Press to change the number.
Press .
Press to change the digit
3. Set the required preset value and press
The preset value is set for the current value and the peak
value is recalculated.
178
2nd axis = reset
2nd axis = reset
2nd axis = preset value
2nd axis = unchanged
.
ENTER
immediately without
ENTER
. (Return to the FUNC
RESET
.
ENTER
Main display
Sub-display
Main display
(Display corresponding to
the preset value)
Sub-display