Scheppach CSE 2200 Originalbetriebsanleitung Seite 32

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new device brings you much enjoy-
ment and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed.
Note:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your product and to use it for its intend-
ed purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such products must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
32 | GB
2. Device description (Fig. 1 - 4)
1. Handle rear
2. Handle front
3. Front hand guard / chain brake
4. Saw chain
5. Locknut/SDS System
6. Chain cover
7. Saw (guide rail)
8. Rear hand guard
9. Mains cable
10. Claw stop
11. Switch lock
12. Strain relief
13. ON/OFF switch
14. Oil tank closure cap
15. Oil level display
16. Chain wheel
17. Guide pin
3. Scope of delivery
• Electric chainsaw
• Usage instructions
• Saw chain
• Saw (guide rail)
• 500 ml chain oil bottle (empty)
• Protective cover for sword
4. Proper use
The chainsaw may only be used for cutting wood out-
doors. The chainsaw must not be used for any other
purpose.
Do not use the chainsaw for work for which it is not
intended. Example: Do not use the electric chainsaw
to saw metal, plastic, brickwork or building materials
other than wood.
The product may only be used in the intended man-
ner. Any use beyond this is improper. The user/
operator, not the manufacturer, is responsible for
damages or injuries of any type resulting from this.
An element of the intended use is also the obser-
vance of the safety instructions, as well as the as-
sembly instructions and operating information in the
operating manual.
Persons who operate and maintain the product must
be familiar with the manual and must be informed
about potential dangers.
The liability of the manufacturer and resulting dam-
ages are excluded in the event of modifications of the
product.
Please note that our products were not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the product is
used in commercial or industrial applications, or for
equivalent work.
www.scheppach.com