Transport Of The Kart; Preservation Of Engine And Equipment - Rotax Fr 125 Max Betriebsanleitung

11. Transport of the kart

If the carburetor is still filled with fuel, the transport of the kart is only allowed to be transported in
a horizontal position.
If the kart is to be transported in a vertical position, the fuel must be drained from the carburetor
first.
Note: If the kart is in a vertical position at transport, the remaining fuel in the carburetor
might flow into the crankcase with the result that the engine won't start at next try.
Remove drain screw on float chamber of carburetor and collect the fuel in a suitable container.
Clean drain screw and refit.

12. Preservation of engine and equipment

For longer periods out of operation (winter time), make sure that the engine will be properly
preserved.
Detach carburetor, drain fuel from carburetor and close carburetor openings to ensure that no
dust or dirt can enter.
Close intake and exhaust port of engine so that they are air-tight with adhesive tape.
Apply oil on exhaust system to prevent corrosion.
Remove battery from the fixture and charge periodically with the specified battery charger.
Seite/page 77/80
Operating Instructions FR 125 MAX
FR 125 MAX Ausgabe/edition 07/99