Sartorius Stedim Biotech Flexsafe 3D Bag For Palletank Benutzerhandbuch Seite 9

Fig. 15
Fig. 16
Fig. 17
12. Ensure that the corners of the bag are in contact with the front corners of the
Palletank ® so that the bag will take the shape of the Palletank
13. Check that the K-seal of the Flexsafe
centerline of the Palletank
(see Fig. 16).
14. Remove the reversible cable tie(s) on the top lines (see Fig. 11).
15. Position all clamps as close as possible to their bag ports, remove their protection
cap and close all of them (see Fig. 17).
Flexsafe
3D bag is correctly positioned along the
®
and parallel to the front and back of the container
®
® 3D System 100L, 200L, 500L Instructions for Use
® . (see Fig. 15).
9