Sartorius Stedim Biotech Flexsafe 3D Bag For Palletank Benutzerhandbuch Seite 13

5. Precautions for Use
To ensure trouble-free operation, the Sartorius Stedim Biotech Flexsafe
y y
must be used with the Sartorius Stedim Biotech Palletank
The Palletank must be clean and dry before inserting the Flexsafe
®
y y
Traces of cleaning agents left on the Palletank
Flexsafe 3D Bag.
®
It is the user's responsibility to verify the compatibility of the Flexsafe
y y
materials with the solutions used in his | her process. Sartorius Stedim Biotech
can provide guidelines for chemical compatibility, biocompatibility and
extractables.
Avoid the use of sharp objects (scissors, cutters, scalpels, etc.) in the vicinity of
y y
the Flexsafe 3D Bag.
®
The Flexsafe 3D Bag should never be handled or carried by its connections
®
y y
(i.e. tubing).
Avoid folding the Flexsafe
y y
When positioning the Flexsafe
y y
adjustments after the initial fill, handle the bag with care and use appropriate
force. Avoid pulling with your full strength. If such strength is required,
it is likely inappropriate to adjust the bag at this time due to the fill volume.
The Flexsafe 3D Bag is designed for single-use and should not be re-used.
®
y y
6. Flexsafe 3D Bag Storage Conditions
®
Flexsafe 3D Bags should be stored in their original primary packaging at room
®
temperature (5°C to 40°C), in a dry environment.
Precautions for Use | Flexsafe
® can potentially damage the
3D Bag other than using the original folds provided.
®
3D Bag in the Palletank
®
® 3D Bag Storage Conditions
3D Bag
®
.
®
3D Bag.
®
3D Bag
®
and during any
®
13