Endress+Hauser Fieldgate FXA42 Betriebsanleitung Seite 66

Betrieb
66
• Web configuration modules initialised
• Update exporter module initialised
• Update web service initialised
• Running
• Starting update from external medium.
• Link detected at Ethernet (<interface index>).
• Restarting DHCP configuration at Ethernet (<interface index>).
• DHCP configuration completed at Ethernet (<interface index>).
• Power fail handling not supported
• Not enough power fail capacity
• Retentive data could not be loaded.
• The internal flash drive seems to be weak.
• Flash write error. The internal flash drive is probably defect.
• One or more certificates could not be loaded.
• Could not initialise NAT/firewall service. (<error code>)
• Could not start Ethernet (1) driver.
• Unsupported Ethernet (1) interface type. (<interface type>)
• Could not initialise NAT/firewall service. (<error message>)
• Could not initialise cellular modem driver: <error message>
• Could not initialise WLAN driver: <error message>
• Could not initialise update module: <error message>
• Could not initialise DHCP server.
• Could not initialise OpenVPN client: <error message>
• Could not initialise system time manager: <error message>
• Could not initialise COM server: <error message>
• Could not initialise portal Event Log service: <error message>
• Could not load and start diagram.
• Could not initialise web configuration modules: <error message>
• Could not initialise update exporter module: <error message>
• Could not initialise update web service: <error message>
• Task cycle time has been violated.
• Could not start update from external medium.
• Link lost at Ethernet (<interface index>).
• RTOS version is not supported. Version (<version number>) is required.
• Device is secured with the default password, please change it.
• Fatal error: <error message>
8.4.2 Login
Auf dieser Seite werden die Anmeldedaten des Fieldgate FXA42 festgelegt.
Fieldgate FXA42
Endress+Hauser