Endress+Hauser Fieldgate FXA42 Betriebsanleitung Seite 63

Fieldgate FXA42
Endress+Hauser
Modbus Client/Master
• Connected to TCP device at <IP address>:<port>.
• Read/wrote from/to TCP device at <IP address>:<port> (unit: <unit identifier>, function
code: <function code>, address: <address>, quantity: <quantity>)
• Read/wrote from/to RTU device <device address> (function code: <function code>, add-
ress: <value address>, quantity: <quantity>)
• The interval has been violated.
• Could not connect to TCP device at <IP address>:<port>. (Error code <code>).
• Could not read/write from/to TCP device at <IP address>:<port> (unit: <unit idenfifier>,
function code: <function code>, address: <address>, quantity: <quantity>, result code:
<result code>, error code: <error code>, exception code: <exception code>)
• Read illegal floating point value from TCP device at <IP address>:<port> (unit: <unit
idenfifier>, function code: <function code>, address: <address>, quantity: <quantity>)
• Could not read/write from/to RTU device <device address> (function code: <function
code>, address: <value address>, quantity: <quantity>, result code: <result code>, excep-
tion code: <exception code>)
• Read illegal floating point value from RTU device <device address> (function code: <func-
tion code>, address: <value address>, quantity: <quantity>)
• Portal communication error <error code>
Modbus Server/Slave
Portal communication error <error code>
Datenübertragung und Datalogging
• Sent FIS data message successfully
• Error on parsing FIS data message
• FIS: Recording data
• FIS event message transmitted successfully
• FIS: Recording event
• HTTP error <HTTP-Error> occurred while sending FIS event message
• HTTP connection error occurred while sending FIS event message
• HTTP connection error occurred while sending FIS data message
• FIS data message transmitted successfully
• HTTP error <HTTP-Error> occurred while sending FIS data message
• Invalid FIS authentication
• Logging data
Nachrichten
• Sending data Email to <name>, address: <name>
• Sending limit Email to <email>, address: <address>
• Sending alarm Email to <email>, address: <address>
• Sent data Email message successfully
• Could not send data Email
• Email: No data recorded
• Email: Recording data
• Email: Recording event
• FTP: Recording data
• Could not send file to FTP server
• Sent measurements file to FTP server
• Sending FIS registration message
• Sending configuration to FIS
• Configuration successful
• FIS configuration version: <Version>
• Invalid FIS authentication data. Trying again in <T> minutes.
• HTTP error <HTTP-Error> occurred while sending FIS registration message. Trying again
in <T> minutes.
• HTTP connection error occurred while sending FIS registration message. Trying again in
<T> minutes.
• FIS registration successful
• New configuration available: <Version>
• Could not apply FIS configuration, update in progress.
Betrieb
63