Parkside PSBS 240 C2 Originalbetriebsanleitung Seite 32

GB MT
Cleaning and
maintenance
Disconnect the plug before adjust-
ment, maintenance or repair.
Have any work not described
in these instructions carried
out by a specialist workshop.
Use only original components.
Allow the equipment to cool
before carrying out any main-
tenance and cleaning work.
There is a risk of burns.
Before each use, check the equipment
for obvious defects such as loose, worn
or damaged components and check that
screws or other parts are sitting correctly.
In particular, check the grinding disk
( 19). Replace damaged parts.
Cleaning
Do not use cleaning agents or sol-
vents. Chemical substances may at-
tack plastic parts of the equipment.
Never clean the equipment under
running water.
• Clean the equipment thoroughly after
each use.
• Clean the ventilation openings and the
surface of the equipment with a brush
or cloth.
Maintenance
• The equipment is maintenance free.
32
Storage
• Store the appliance in a dry place well
out of reach of children.
• Grinding disks must be stored dry and
upright and are not to be stacked.
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines are not to be place with
domestic waste.
Directive 2012/19/EU on waste electrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmental-
ly sound manner.
Depending on the implementation in national
law, you may have the following options:
• Return to a shop: Food retailers with a
total sales area of at least 800 square
metres that offer electric and electronic
devices multiple times a year or perma-
nently and distribute them on the market
are obligated to take back old electric
and electronic devices at no charge.
When handing a new electric or electro-
nic device to an end user, they have to
take back an old device of the same kind
from the end user that essentially fulfils
the same functions as the new device at
the site of handover or in the immediate
vicinity at no charge as well as take back
up to three old devices per device type
with external dimensions no larger than
25 centimetres in the retail shop or the
immediate vicinity at no charge without
the purchase of an electric or electronic
device at the request of the end customer.