ABB FXE4000 Inbetriebnahmeanleitung Seite 49

3.4 Electrical connection
3.4.1 Preparing the signal and excitation current cable
Cut to length and terminate the cable as shown.
Note
Use wire end sleeves.
Fig. 16
Transmitter side
Fig. 17
1 Measurement potential, yellow
2 white
3 Electrode signal line, red
Note
The shields may not touch (signal short circuit).
D184B133U02 FXE4000 (COPA-XE/MAG-XE)
Flowmeter primary side
4 Electrode signal line, blue
5 SE clamp (shield)
Installation
EN - 15