Agilent Technologies TPS-mini 9699180 Bedienungshandbuch Seite 294

17 Technical Information
J1 – IN-OUT
How to Connect the Open Collector Input of the
Controller
Here below there are the typical connections of the open collector
input of TPS-mini to an external system. Two cases are considered:
1
2
Please note that on the connector a 24 Vdc, 30 mA voltage, a
GROUND signal and the open collector pin are available.
Figure 28
294/318
the customer supplies the 24 Vdc
the customer does not supply the 24 Vdc.
Case 1
TPS-mini User Manual / 87-901-003-01 (E)