Agilent Technologies TPS-mini 9699180 Bedienungshandbuch Seite 264

16 Instructions for Use
Maintenance
Maintenance
The TPS-mini does not require any maintenance. Any work
performed on the system must be carried out by authorized
personnel.
WARNING! Before carrying out any work on the system, disconnect it from the mains,
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center.
Before returning the system to the constructor for repairs, the "Request for
NOTE
Return" sheet attached to this instruction manual must be filled-in and sent to
the local sales office. A copy of the sheet must be inserted in the system
package before shipping.
If a system is to be scrapped, it must be disposed of in accordance
with the specific national standards.
Cleaning
The exterior surfaces of the TPS-Mini may be cleaned with mild
detergents only.
264/318 TPS-mini User Manual / 87-901-003-01 (E)