D) Selecting The Country/City For The Weather Display; E) Deleting A City From The Display List - Conrad DV928 Bedienungsanleitung

d) Selecting the country/city for the weather display

You can select up to 5 cities whose weather forecast can be displayed later with the buttons " " (1) and " " (2).

Chapter 21 includes a list of all available cities.
Proceed as follows for selecting:
• Keep the button "SET" (3) depressed (approx. 3 seconds) until "LAND EINST." (set country, "COUNTRY") appears
on the display.
• With the buttons " " (1) and " " (2), select the country (e.g. "D/GER" for Germany) and confirm your selection
by briefly pressing the button "SET" (3).
Now the display shows "STADT EINST." (set city, "CITY").
• Select a city with the buttons " " (1) and " " (2).
• Confirm the setting by briefly pressing the "TEST" button (8). A small tick appears above the name of the city.
Press the button "TEST" (8) again to delete the city from the list; the tick disappears.

If "SPEICHER_V" (= "MEM FULL") appears, all 5 slots are assigned.
You can save up to 5 cities to display their weather data. To save another city, you first have to delete
an available city from the list (see next chapter).
• By pressing the button "SET" (3) on the right side of the weather station, you leave setup mode.

e) Deleting a city from the display list

As described in chapter 11. d), you can save up to 5 cities in different countries and display their weather forecast
with the buttons " " (1) and " " (2).
To delete a city from the display list, proceed as follows:
• Select the city you want to delete from the display list with the buttons " " (1) and " " (2).
• Keep the button "SET" (3) on the right side of the weather station depressed (approx. 3 seconds) until "LAND
EINST." (= set country, "COUNTRY") appears on the display.
• Briefly press the button" " (1). Now the country in which the city to be deleted is located is displayed.
• Then briefly press the "SET" button (3).
• Now the display shows "STADT EINST." (set city, "CITY").
• Briefly press the button" " (1). The city is displayed now (observe the small tick mark "√" above the city).
• Then press the button "TEST" (8). The hook icon "√" disappears and the city is deleted from the display list.
• Leave delete mode by pressing "SET" (3).
78