HBM PMX Bedienungsanleitung Seite 1328

Soft-API CODESYS V3 (uniquement WGX001)
Description: TEDS: sensor configuration for 'HBM pulse'
failed. Sensitivity, excitation voltage or bridge resistors
not suitable for Slot:%1, Signal:%2
Id: 4168 Name:tedsConfigSensorFailed
Argument:slot Type:int32
Argument:signal Type:int32
Description: TEDS: sensor configuration failed. Slot:%1,
Signal:%2
Id: 4170 Name:tedsConfigHbmDisplExcFreqFailed
Argument:slot Type:int32
Argument:signal Type:int32
Description: TEDS: sensor configuration failed because
of exc­frequency or amplitude. Slot:%1, Signal:%2
Id: 4180 Name:tedsConfigScalingOK
Argument:slot Type:int32
Argument:signal Type:int32
Argument:physSignalVal_x1 Type:double
Argument:usrVal_y1 Type:double
Argument:physSignalVal_x2 Type:double
Argument:usrVal_y2 Type:double
Description: TEDS: scaling configuration OK. Slot:%1,
Signal:%2, Scaling: physSignalVal_x1:%3, usrVal_y1:%4
; physSignalVal_x2:%5, usrVal_y2:%6
Id: 4182 Name:tedsConfigScalingFailed
Argument:slot Type:int32
Argument:signal Type:int32
Description: TEDS: scaling configuration failed. Slot:%1,
Signal:%2
Id: 4190 Name:tedsConfigHpFilterNotSupported
Argument:slot Type:int32
Argument:signal Type:int32
Description: TEDS: highpass filter configuration not sup­
ported. Slot:%1, Signal:%2
PMX 341
A3257-5.1 HBM: public