Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE AND REPAIR
For minor trouble, refer to the troubleshooting section in this manual for
possible causes and corrective action.
Only qualified personnel should make electrical inspections of the
Quantum 2000 Light Source.
Repair: To locate qualified personnel, contact your local authorized
Stryker distributor.
WARRANTY AND SERVICE
Stryker warrants the Quantum 2000 Light Source when new, to be free
of defects in material and workmanship and to perform in accordance with
manufacturer's specifications when subject to normal use and service for
a period of one year from the date of purchase from Stryker or an auth-
orized agent. Stryker will either repair or replace any components found to
be defective or at variance from manufacturer's specifications within this
time at no cost to the customer. It shall be the purchaser's responsibility
to return the instrument directly to the authorized distributor, agent, or
service representative.
This warranty does not cover the SdlarcTM Lamp for breakage or failure due
to tampering, misuse, neglect, accidents, improper installation, modification,
shipping, or to improper maintenance, service, and cleaning procedures.
This warranty is also void if the instrument is not used in accordance with
manufacturer's recommendations or if required or serviced by other than
Stryker or an authorized agent. Purchase date determines warranty
requirements. No other express or implied warranty is given.
ORDERING INFORMATION
Part No.
Light
Source
502 220 175
502 220 177
Replacement
Power
502 220 179
502 220 180
Lamp
502 220 176
Fuses
502 220 178
Description
Quantum 2000 Light Source with European Power Cord
Quantum 2000 Light Source with United Kingdom Power Cord
Cords
European Power Cord
United Kingdom Power Cord
Replacement
Lamp
Replacement
Fuse
12
Werbung
