English
20 Maintenance
20.1
Visual Inspection
► Regularly check the robot mower:
– Cleanliness of the charging contacts
– Check the hood and protective strip for
damage
– Check that the wheels run smoothly
– Check the blades for damage, wear, cracks
and smooth running
– Check the blade disk for damage and wear.
– If the wear marks (1) are worn through,
creating a hole, replace the blade disk.
– Check the plug (2) of the diagnostic socket
for damage and tight fit.
20.2
Replacing blades
WARNING
■ The cutting edges of the blades are sharp.
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
► Stop the robot mower and activate the device
lock.
1
► Grab the robot mower at the front grip sur‐
face (1) and the rear grip surface (2).
86
► Turn the robot mower on its back.
► Press and hold the lever (3).
1
► Rotate the nut (4) counterclockwise until it can
be removed.
► Remove the nut (4).
2
► Remove the blade disk (5).
► Push the blade carrier (6) in the direction indi‐
cated by the arrow
The blade carrier (6) is unlocked.
► Remove the blade carrier (6).
2
7
► Detach all old blades (7).
3
3
4
5
6
.
7
7
20 Maintenance
4
0458-012-9601-A