Stihl MOW 5.0 EVO Bedienungsanleitung Seite 60

English
The robot mower identifies fixed obstacles (2) in
the mowing area using ultrasound sensors and a
bump sensor.
If the robot mower identifies a fixed obstacle (2),
it will slow down, bump into the fixed obstacle
and then continue to move in a different direc‐
tion.
Areas (3) the robot mower must not navigate and
obstacles it must not come into contact with must
be blocked off from the remaining mowing area
with the help of the perimeter wire (1).
If the robot mower identifies a blocked-off
area (3), it will slow down and then continue to
move in a different direction.
In mowing operation, the robotic mower leaves
the docking station by itself and mows the lawn.
The robotic mower is operated by the
®
MY iMOW app and the buttons in the control
panel on the robotic mower. Light strips and the
matrix display on the robotic mower as well as an
artificially generated voice output provide infor‐
mation about the current status of the robotic
mower.
4
If the battery's state of charge is low, the robotic
mower will search for the nearest guide wire (4)
during the mowing operation. If a guide wire (4)
is recognized, the robotic mower will return to the
docking station by itself. The docking station
recharges the battery. At least one guide wire (4)
must be installed in the mowing area. A maxi‐
mum of three guide wires can be installed. If the
mowing operation is canceled or the battery must
be charged, the robotic mower can be sent
directly back to the docking station using the
®
MY iMOW app or HOME pushbutton.
60
A
5
B
Up to three starting points (5) can be specified
on a guide wire (4). The robotic mower can move
specifically to the respective starting point and
start mowing from there.
The mowing area can be divided into several
zones (example: A and B) by the guide wire (4).
The zones are defined by a starting point (5).
The robotic mower can be directed from the
selected starting point to the left or right into the
desired zone. The robotic mower can then mow
specifically in the selected zone. The starting
points and zones are managed in the
®
MY iMOW app and can be taking into account
in the mowing plan.
If there is a confined section (6) in the mowing
area, the robotic mower navigates the confined
area, provided that a particular minimum width is
maintained between the perimeter wires. If the
minimum distance cannot be maintained, a guide
wire (7) must be routed through the confined
section (6). The guide wire (7) then guides the
robotic mower directly through the confined sec‐
tion (6) to a starting point (8). From the starting
point (8), the robotic mower can mow the mow‐
ing area behind the confined section (6). The fre‐
quency at which the robotic mower returns to the
starting point (8) can be managed by the
®
MY iMOW app and taken into account in the
mowing plan.
5 Description of Operation
4
6
7
8
0458-012-9601-A