Cleaning, Maintenance And Repair; Description Of Operation; Functional Description - Stihl iMOW 5.0 Gebrauchsanleitung

English
■ The connecting cable and charging cable are
not intended to carry the weight of the power
supply or docking station. The connecting
cable, power supply, charging cable or dock‐
ing station may be damaged.
► Disconnect the charging cable from the
power supply and docking station and coil
it.
► Grip the docking station by the base plate
and hold it firmly.
► Wind up the connecting cable and attach it
to the power supply.
► Grip the power supply by the housing and
hold it firmly.
4.12 Cleaning, maintenance and
repair
WARNING
■ The robot mower may start unintentionally if
the device lock is not activated during clean‐
ing, maintenance or repair operations. This
may result in serious injury to people and
damage to property.
► Stop the robot mower and activate
the device lock.
■ Harsh detergents or cleaning with a high pres‐
sure washer or sharp metallic objects can
damage the robot mower. If the robot mower
is not cleaned correctly, components may no
longer function properly or safety devices may
be rendered inoperative. People may be seri‐
ously injured.
► Clean the robot mower as described in this
User Manual.
■ Harsh detergents or cleaning with a high pres‐
sure washer or sharp metallic objects can
damage the docking station, power supply,
connecting cable, charging cable and plug
connections. If the docking station, power sup‐
ply, connecting cable, charging cable or their
plug connections are not cleaned correctly,
components may no longer function properly
or safety devices may be rendered inopera‐
tive. People may be seriously injured.
► Disconnect the power supply's mains plug
from the wall socket.
► Clean the docking station, power supply,
connecting cable, charging cable and their
plug connections as described in this User
Manual.
■ If the robot mower, docking station or power
supply are not serviced or repaired correctly,
components may no longer function properly
58
or safety devices may be rendered inopera‐
tive. There is a risk of serious or fatal injury.
► Do not service or repair the robot mower,
docking station and power supply yourself.
► If the robot mower, docking station or power
supply require servicing or repairs: Contact
a STIHL authorized dealer.
► Maintain the blades as described in this
User Manual.
■ The user can be cut by the sharp cutting
edges of the blades while cleaning or servicing
the mowing unit. This may result in injury to
the user.
► Wear work gloves made of robust material.
■ If the power supply's connecting cable is faulty
or damaged:
► Replace power supply.
■ If the plug of the diagnostic socket on the bot‐
tom of the robot mower does not fit correctly,
moisture and dirt can penetrate the robot
mower. The robot mower may be damaged.
► Check the fit of the plug during each clean‐
ing and blade change.
► Do not operate the robot mower with a
missing or damaged plug.
5

Description of Operation

5.1

Functional description

1
The robot mower mows the grass in randomly
selected paths. It is necessary to route a perime‐
ter wire (1) so the robot mower can identify the
boundaries of the mowing area.
The perimeter wire (1) transmits a signal to the
robot mower. The signal is generated by the
docking station.
The robot mower identifies fixed obstacles (2) in
the mowing area using ultrasound sensors and a
bump sensor.
If the robot mower identifies a fixed obstacle (2),
it will slow down, bump into the fixed obstacle
and then continue to move in a different direc‐
tion.
5 Description of Operation
3
2
0458-011-9801-A