Positioning The Docking Station; General Requirements - Stihl MOW 5.0 EVO Bedienungsanleitung

English
7 Positioning the docking
station
7.1

General requirements

Wi-fi
► Choose the docking station location so that
the following conditions are met:
– The charging cable (1) can be installed out‐
side of the mowing area to connect to a suit‐
able wall socket.
– The docking station and power supply are
positioned in a clearly visible area.
– The docking station is in the mowing area
that is the largest or most frequently
mowed.
– If possible, protect the location against
adverse weather conditions and direct sun‐
light.
– If possible, the docking station is within
range of a wireless network (WLAN connec‐
tion).
– If possible, in a mowing area with a slope,
the docking station is in the lower area of
the slope.
► Align the docking station so that the following
conditions have been met:
– The docking station has been positioned on
a level surface.
62
1

7 Positioning the docking station

– The opening of the docking station is facing
forward toward the mowing area.
– The docking station has been aligned hori‐
zontally and is not tilted to the side, the front
or the rear.
– The base plate does not sag and lies flat on
the ground.
7.2 Positioning the docking station
The correct position of the docking station
depends on the planned location and its sur‐
roundings.
► Select the location and set up the docking sta‐
tion as described.
Positioning the docking station within the mowing
area
The docking station is at the edge of the mowing
area by a wall and the guide wire (1) can be
routed for a =2 m in a straight line from the dock‐
ing station to the mowing area.
The docking station is at the edge of the mowing
area. The adjacent area is navigable and the
guide wire (1) can be routed for a =2 m in a
straight line from the docking station to the mow‐
ing area.
a
90°
1
a
90°
1
0458-012-9601-A