Charging The Robot Mower; Closing Bluetooth® Radio Interface - Stihl MOW 5.0 EVO Bedienungsanleitung

12 Charging the Robot Mower

► Mount the power supply so that the following
conditions are met:
– Suitable fixing materials.
– The power supply is level.
Following distances are complied with:
– The power supply is outside of the
range (a) of possible electrical installa‐
tions.
– A suitable socket is within reach of the
power supply.
– If possible, protect the location against
adverse weather conditions and direct sun‐
light.
12 Charging the Robot Mower
12.1 Charging the robotic mower
► Push the robot mower into the docking station
up to the limit stop.
The robot mower carries out a system start
and begins charging.
The charging time depends on various factors,
e.g. the battery temperature or the ambient tem‐
perature. For optimum performance, note the
recommended temperature ranges,
0458-012-9601-A
23.7.
1
2
The LED (1) on the docking station lights up
white. An LED (2) lights up white on the light strip
of the robot mower.
After the first charging, the robotic mower will
charge automatically in the future as soon as it
returns to the docking station after a mowing job.
Energy efficient charging
In order to charge the robotic mower's battery
with a minimum amount of energy, all of the
robotic mower's and docking station's unneces‐
sary extra features besides the charging function
can be deactivated.
► If the theft protection function in the
®
MY iMOW app is activated, deactivate the
theft protection.
Press the following key combination one after the
other:
► Press STOP (3).
The robot mower is stopped and locked
► Press and hold STOP (3) until the light
strip (4) fully lights up red.
► Press STOP (1).
The light strip (4) flashes twice. The device
lock of the robot mower is activated.
► Press and hold STOP (3) until the light
strip (4) fully lights up red and finally flashes
red twice.
"Energy efficient charging" mode is activated.
The robot mower's battery is fully charged. All
extra functions are deactivated.
After charging is complete, the robot mower must
be activated so that it is operational again:
► Press START (5).
The robotic mower is operational.
13 Closing Bluetooth® Radio
Interface
13.1 Setting up the Bluetooth
interface
The robotic mower regularly emits a Bluetooth
signal in order to be able to connect with a
English
4
5
3
-radio
®
®
81