Kärcher SB MB Bedienungsanleitung Seite 51

Changing code
For the user group Owner , the code can be changed af-
ter logging in.
1. Press the "..." button.
"..." menu button
1
2. Enter the desired code in the "EnterNew Code" win-
dow.
3. Enter the same code again for confirmation in the
"Confirm New Code" window.
Menu Wash-Program Settings
The parameters of the individual washing programs are
adjusted in the Wash-Program Settings menu.
Next window button
1
Change washing program button
2
Previous window button
3
Window 1 of 2
4
Washing program designation
5
Changing the parameters of a washing program
1. Select the window with the desired washing pro-
gram. Use the Next Window and Previous Window
buttons for this.
2. Press the Change washing program button next to
the desired wash program.
Change parameters button
1
Program running time for one wash value in sec-
2
onds
Water type (hot water/cold water)
3
Detergent dosing (in % of the dosing pump capaci-
4
ty)
Washing program name
5
Detergent designation
6
3. Press the button to change the desired parameter.
4. Press the desired parameter in the displayed selec-
tion.
Standard setting
Washing pro- Dosing water type Program
gram pump
High-pressure 1 (yellow) Warm
Wash
Foam Wash 1 (yellow) Cold
Rinse - Cold
Hot wax 2 (red) Warm
Insects Loosen- 3 (green) Warm
ing
Dirt Loosening 3 (green) Warm
Power foam 3 or 4 (light Warm
green)
Power rim foam 3 or 4 Cold
(white)
Top care 3 or 4 (red) Permeate
Washing pro- Hydro- water type Program
gram minder
Wheel cleaning GB 515 Cold
Intensive Foam GB 511 cold, soft
water
Washing pro- Detergent dosing unit dosing
gram pump
500 l/h
% ml/min %
High-pressure 8 Approx.
Wash 6
Foam Wash 8 Approx.
6
Rinse - -
Hot wax 10 Approx.
7
Insects Loosen- 20 Approx.
ing 14
Dirt Loosening 20 Approx.
14
Power foam 30 Approx.
21
Power rim foam 30 Approx.
21
Top care 10 about 7 20
Washing pro- Detergent dosing unit hydromind-
gram er
500 l/h
% ml/min %
Wheel cleaning 2.6 39
Intensive Foam 1.1 26
Menu Machine
In the Machine menu, system parameters are set and
the washing station can be locked.
"Lock" menu button
1
"Coin value" menu button
2
"Components" menu button
3
English
Menu Components
Various system parameters can be set in this menu.
duration
90 s
135 s
105 s
54 s
75 s
75 s
60 s
60 s
Components menu 1 of 2 (depending on the equipment
of the system, 1 or more windows are displayed)
75 s
Foam hose heater night mode
1
Activate / deactivate night mode of the foam hose
heater
duration
Note
75 s
When the function is activated, the hose heating switch-
75 s es off at the end of operation and is switched on again
1 hour before the start of operation.
If the function is not activated, the hose heating is also
switched on outside the operating time.
Hot water generator night mode
2
900 l/h
Activate / deactivate night mode of hot water gener-
ation
ml/min
Note
16 Approx.
When the function is activated, the burner switches off
12
at the end of operation and starts again 10 minutes be-
16 Approx.
fore the start of operation.
12
If the function is not activated, the burner keeps the hot
water float tank at the set temperature even outside the
- -
operating time.
20 Approx.
Hot water temperature
14 3
Setpoint temperature of the hot water (30...60 °C)
40 about
28
40 Approx.
28
30 Approx.
21
30 Approx.
21
Approx.
14
900 l/h
Menu Components 2 of 2
ml/min
Vacuum cleaner duration
2.6 39 1
Run time of a SB vacuum cleaner per washing unit
1.1 26
(0...480 seconds).
Twilight value
2
Limit value from which ambient brightness the light-
ing should be switched on (0...700).
Note
The currently measured brightness value is shown in
brackets.
Menu Coin value
In the Coin value menu the wash value for 100% pro-
gram run time and the coin values for the individual
channels of the coin acceptor are set.
The coin values for washing stations and vacuum clean-
ers can be set separately
Vacuum cleaner
1
Coin value Vacuum cleaner (can only be operated if
vacuum cleaners are present on the system)
51