Kärcher SB MB Bedienungsanleitung Seite 50

Changing the setting
1. Press the Change Setting button next to the proper-
ty you want to change.
Change Setting button
A selection window opens to select the desired set-
ting or a keyboard opens to enter the desired value.
Menu overview
Washing menu / Vacuuming
The current operating status of the individual washing
stations is displayed in the Washing / Vacuuming menu.
Vacuuming menu (can only be operated if vacuum
1
cleaners are present on the system)
Menu Washing
2
Menu Washing
The current operating status of the washing station is
displayed in the Washing menu.
Display next washing station
1
Reset washing credit
2
Display previous washing station
3
Increase washing credit
4
Note
The increased washing credit with this function also al-
lows operation outside the set opening hours (e.g. for
care and maintenance work).
Running washing programme
5
Run time per wash value / (money) amount corre-
sponding to one wash value
Note
If an additional washing time and a percentage sur-
charge are displayed, you are currently in "Happy Hour"
mode.
Washing station number
6
Credit (amount) / remaining washing time
7
Display washing station:
8
50
green: Washing station is released
red: Washing station is locked
Display remote control heating:
9
green: Heating is on
red: Heating is off
Home button
10
press briefly - jump back one menu level
long press - jump back to the start menu
Menu Vacuuming
The Vacuuming menu is only visible if self-service vac-
uum cleaners are registered with the system.
Display next vacuum cleaner
1
Reset vacuum time credit
2
Display previous vacuum cleaner
3
Increase vacuum time credit
4
Vacuum cleaner number
5
Home button
6
press briefly - jump back one menu level
long press - jump back to the start menu
Vacuum time remaining credit Station 1
7
Vacuum time remaining credit Station 2 (only with 2-
8
station vacuum cleaners)
Menu Service
Manual functions are carried out in the Service menu.
Service functions for customer service
1
Manual functions for the operator
2
Next manual function
1
Start the manual function
2
Note
After starting the manual function, the sym-
bol changes and the remaining run time is
displayed below it
Previous manual function
3
Designation of the manual function
4
Description of the manual function
5
English
List of manual functions:
A All dosing pumps are switched on for 180 seconds.
*
B The washing station lighting is switched on for 180
seconds. *
C The frost protection circuit is switched over for 10
minutes. *
● If the system is in frost protection mode, this is
interrupted for 10 minutes.
● If the system is not in frost protection mode, the
frost protection circuit is activated for 10 min-
utes.
D The foam hose heater is activated for 180 seconds.
*
E The washing station heater is switched on for 180
seconds. *
F Permeate production is started. *
● Permeate production stops when the buffer
tank permeate is full
● If permeate is started when the buffer tank is
full, permeate production ends after 180 sec-
onds.
G The regeneration of the base exchanger is started.
The regeneration cannot be cancelled.
* If the "Start manual function" key is pressed again
within the run time, the manual function is terminated.
Menu Settings
Menu User Administration
The user group is selected in the User Administration
menu. Different user groups have different access per-
missions
"Service" button
1
"Owner" button
2
"Operator" button
3
A code must be entered when selecting the user groups
"Owner" and "Service".
Note
Default code Owner: 1111
Keyboard
1
Input field
2
Confirm the entry
3
Delete the entry
4