Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
pic. 11
Commissioning
Connect the twisted receiver cord with the corre-
sponding jack (point
the base unit.
Remove the cover of the battery compartment by
opening it e.g. with a biro as presented in
and then move it upwards. Insert the four enclosed
micro batteries (AAA). Please pay attention to the
polarization indicated in the battery compartment.
Close the battery compartment again.
Connect one end of the telephone connection cord
with the corresponding jack at the base unit (point
Safety Precautions
Please pay attention to the following
advises whenever you place, connect
e
or use the telephone:
Read the manual and keep it for reference.
Additional questions can be answered by your
dealer. There are no user serviceable parts
inside. Do not open the case!
Improper use or exchange of the wall-mount
power supply may be dangerous to life. Use
only the AC-DC adapter specified for this unit.
Make sure, the plug is inserted securely into
the wall mains outlet. Loose plugs or damaged
outlets are a fire hazard. Do not pull at the
cable of the wall-mount power supply. Pull at
the wall-mount power supply itself If you want
to switch off the device power. In case of dam-
age to the wall-mount power supply: Interrupt
the mains power of the house first before pull-
ing the plug of the wall-mount power supply.
Environmental Advice
Dispose of empty batteries properly. Don't
dispose of batteries as household waste
but at collection points especially set up for that
purpose. If your system is taken out of use one
day, please take care of a proper disposal. If you
like us to take care of the disposal, send back the
system to us. Unfortunately we cannot accept
unpaid packages.
in
pic. 10 on page
18) at
pic. 11
in
pic. 10 on page
18) and the other one with the
wall jack of your analog telephone connection. In
Germany you will need the enclosed TAE-F
adapter.
Connect the enclosed wall-mount power
supply p unit with the corresponding jack at
the base unit (point
the other one into a free accessible 230 Volt outlet.
Do not connect the telephone with an
ISDN jack.
Never touch the plug contacts with pointed,
metal or wet things.
Avoid placing the device into direct sunshine
or other source of temperature.
Protect the device against moisture, dirt,
aggressive fluids or steam.
Avoid placing the device into strong electro-
magnetic
fields
(electric
phones, TV sets, VCRs, radios and household
equipment). The quality of speech might suf-
fer.
Connect the plugs only to the appropriate wall
plugs. Never modify the plugs of the connector
cables. The device should not be carried on
the cables.
The telephone must not be used in wet envi-
ronments (bath rooms).
19
in
pic. 10 on page
18) and
motors,
mobile
Quicklinks ausblenden:
Werbung
Kapitel
