Save A Telephone Number In The Destination Speed Dialing Memory; Save A Telephone Number In The Short-Code Dialing Memory - Auerswald Comfort 300 Bedienungsanleitung

ENGLISH
With the arrow keys you can sup-
press or permit the display of the day
of the week or (– for „no display ").
Press the setting key.
In the third display line there is the
setting for the display contrast.
With the arrow keys you can select
the requested contrast (high or low).
Press the OK key to confirm your
selection.
time
date
day of the week
TOTAL 00 SUN
Save a Telephone Number in the destina-
tion speed dialing memory
There are three destination speed dialing memo-
ries for the most frequently dialed numbers.
N
Enter the number to be saved with
the keypad (18 digits maximum).
M 1 ...
Press and hold one of the destina-
M 2 ...
tion speed dialing keys (M1-M3) until
or
M 3 ...
„SAVE OK" is shown on the display.
or
12:17 18
During the entry of telephone numbers
you can delete the last digit with the delete
key .
You can additionally store the DTMF signs
*
with the digits z
enter pauses with the redialing key
the digits if necessary.
If the telephone number entry is longer than 18
digits, the message „TOO LONG" will appear on
the display and the telephone number will not be
stored.
To overwrite a destination speed dialing memory,
simply redo the same procedure. A separate dele-
tion of the destination speed dialing memory is not
available.
/
12:17 18 1
/
1
112
SAVE OK
- . Besides this you can
between
Operation with a PBX: Please add a preceding
exchange line access number to an external tele-
phone number (e.g. „0").
Save a Telephone Number in the Short-
Code Dialing Memory
Additional to the three destination speed dialing
memories there are ten short-code dialing memo-
ries available for other important telephone num-
bers.
N
00
N
-
one of the digit keys the telephone number will not
be saved as a short-code dialing number but as a
destination speed dialing number.
During the entry of the telephone number you can
delete the last digit with the delete key
You can additionally store the DTMF signs
*
with the digits
enter pauses with the redialing key
#
and
the digits if necessary.
If the telephone number entry is longer than 18
digits, the message „TOO LONG" will appear on
the display and the telephone number will not be
stored.
To overwrite a short-code dialing memory, simply
redo the same procedure. A separate deletion of
the short-code dialing memory is not possible.
Operation with a PABX: Please enter a preceding
exchange line access number to an external tele-
phone number (e.g. „0").
Press the memory key.
You can see „-->" on the display
now.
12:17 18
Via the keypad enter the telephone
numbers to be stored (18 digits max-
imum).
Press the memory key again.
You can see „-->?" on the display
now.
Press one of the digit keys.
You can see „SAVE OK" on the dis-
play now.
If you finally press one of the destination
speed dialing keys (M1-M3) instead of
- . Besides this you can
23
/
N
1 00
--)
.
#
and
between