Outside Line Code; Deleting The Outside Line Code - AUDIOLINE CDL980G Bedienungsanleitung

AUDIOLINE CDL 980G

OUTSIDE LINE CODE

With some private exchanges, it is necessary to dial a certain number (e.g. "9" or
"0") in order, after a short pause, to obtain a dialling tone for an outside line on the
extension. After being set up for your exchange, your AUDIOLINE CDL980G
automatically inserts a dialling pause when the outside line code is detected. Three
different outside line codes, each having up to two digits, can be entered.
Press the Save button
shows that you can select one of the three groups.
Now select the required group by pressing the numbers 1, 2 or 3. The display
shows the current setting for the selected group.
Now enter the pre-set pause length of 3 or 6 seconds using the numbers 1 or 2.
The display confirms the entry with the message "1P".
Now enter the new outside line code, maximum two digits.
Confirm the entry with the Save button
If your telephone is not connected to a private exchange you should not enter an
outside line code.

Deleting the outside line code

Press the Save button
shows that you can select one of the three groups.
Now select the required group by pressing the numbers 1, 2 or 3. The display
shows the current setting for the selected group.
Confirm the deletion with the Save button
54
and the number 3 on the number pad. The display
.
and the number 3 on the number pad. The display
PRIVATE EXCHANGES
.