Programming; Button Click; Set Call Tone (Ringing Tones ) - AUDIOLINE CDL980G Bedienungsanleitung

PROGRAMMING

PROGRAMMING
The handset and the base station can be adapted to your needs using the functions
described in this chapter. If you make a mistake when programming, you can exit the
programming mode at any time by pressing the
pressed for 15 seconds when programming, the programming process is
automatically terminated.

BUTTON CLICK

Each time a button is pressed, the CDL980G confirms with a button click. The
button click can be switched on or off.
Press the Save button
shows the current setting.
Now select whether you would like the button click to be switched on or off:
1 = Button click on (ON)
2 = Button click off (OFF)
Press the Save button

SET CALL TONE (RINGING TONES )

Your handset can respond with four different ringing tones when a call comes
through.
Press the Save button
shows the current setting.
Now select the required ringing tone using the buttons 1 to 4. The ringing tone
will sound during selection. The ringing tone can be turned off altogether using
the 5 button.
Press the Save button
4
and the number
.
5
and the number on the number pad. The display
.
AUDIOLINE CDL 980G
button. If no button has been
on the number pad. The display
49