3.14 Access Number for International Numbers
For international numbers, your telephone automatically replaces the "+" sign
with the access number
change, you can find the "Auslandsvorwahl (international dialling code)" in the
menu.
3.15 Outside Line Code on Private Exchanges
If you have connected your telephone to a private exchange, you may need to
dial a particular number (e.g. "9" or "0") in order to get a dialling tone for an
outside line on your extension. If you have transferred the telephone numbers
from your mobile phone to your telephone via the SIM card, these telephone
numbers must be automatically supplemented by the outside line code when
dialling. Therefore, now enter the outside line code necessary for your private
exchange.
A. Please follow the instructions:
Press the MENU button once.
Turn the Jog dial until the "Einstellungen" message
appears in the display
Confirm with YES.
Turn the Jog dial until the "Amtskennzahl" message
appears in the display.
Confirm with YES.
Note: codes already entered will not be shown in the
display.
Now enter your own outside line code.
Confirm with YES.
To exit programming mode, press the NO button twice.
Note: If you want to delete an outside line code already stored, do not enter a
number when programming and confirm the blank display.
46
- Setting up -
for international calls. If this number should ever
Display shows:
Hinzufügen
Einstellungen
Uhr
Amtskennzahl
Nummer:
e.g. "0"
Gespeichert –
Amtskennzahl