Redial; Find Handset (Paging); Calls Between Base Station And Handset; Recording Telephone Calls - AUDIOLINE CDL980G Bedienungsanleitung

OPERATION

REDIAL

Use Redial if the person called is engaged or does not reply. Your telephone stores
the last 4 numbers dialled.
Press the button several times until the stored telephone number is shown in
the display.
Now press the call button
automatically dialled.

FIND HANDSET (PAGING)

If you cannot remember where you have left the handset, press the
the base station for 2 seconds. You will hear the handset audible signal for 20
seconds and thus be easily able to find it again. The audible signal is cancelled using
the
button on the handset or the

CALLS BETWEEN BASE STATION AND HANDSET

Internal calls can be made between the base station and the handset. To do this, press
the button on the base station or the handset once. The other station starts to
ring and the call can be accepted there by pressing the
volume can be controlled by means of the
ended either from the base station or the handset by pressing the

RECORDING TELEPHONE CALLS

Using this function, you can record a telephone call currently in progress. In this way
you can listen to the details again later to note down a telephone number for
example.
During a call, press the
display.
To stop recording, briefly press the
back later using the answering machine message retrieval facility.
Note: The handset cannot send any Touch-Tone signals during recording.
and the telephone number displayed will be
button on the base station.
and
button until the message "2 way rec" shows in the
button. The recording can be played
AUDIOLINE CDL 980G
button on
button. The base station
buttons. The call can be
button.
47