2.10 Outside Line Code On Private Exchanges - AUDIOLINE 300G Bedienungsanleitung

AUDIOLINE TELEPHONE 300G
Ja
Confirm with
Note: A local dialling code already entered will not be shown in the
display.
Now enter your own local dialling code without the zero.
Ja
Confirm with
To exit programming mode, press the

2.10 OUTSIDE LINE CODE ON PRIVATE EXCHANGES

If you have connected your 300G telephone to a private exchange, you may need to dial a
particular number (e.g. "9" or "0") in order to get a dialling tone for an outside line on your
extension. If you have transferred the telephone numbers from your mobile phone to your 300G
telephone via the SIM card, these telephone numbers must be automatically supplemented by
the outside line code when dialling. Therefore, now enter the outside line code necessary for
your private exchange.
A. Please follow the instructions:
Menü
Press the button once.
Turn the Jog dial until the "Einstellungen" message appears in
the display
Ja
Confirm with
Turn the Jog dial until the "Amtskennzahl" message appears in
the display.
Ja
Confirm with
Note: codes already entered will not be shown in the display.
Now enter your own outside line code.
Ja
Confirm with
To exit programming mode, press the
Note: If you want to delete an outside line code already stored, do not enter a number when
programming and confirm the blank display.
.
.
.
.
.
Nein
button twice.
Nein
button twice.
INSTALLATION
Nummer:
e.g. 6747
Gespeichert =>
Ortsvorwahl
Display shows:
Hinzufügen
Einstellungen
Uhr
Amtskennzahl
Nummer:
e.g. "0"
Gespeichert –
Amtskennzahl
41