Operation; Making Calls; Automatic Cut Off After 15 Minutes; Exceeding The Range - AUDIOLINE CDL980G Bedienungsanleitung

OPERATION

OPERATION

MAKING CALLS

Enter the required telephone number using the keypad. The numbers pressed are
shown in the display. If you have entered a wrong digit, the telephone number can
be deleted using the
Press the call button
To end the call, replace the handset on the base station or press the
on the handset.
You can also get a dialling tone by first pressing the call button
the digits of your required telephone number, your AUDIOLINE CDL 980G dials
the number directly. With this method of making a call, it is not possible to correct
individual digits in the number in the manner described above.
Note! If your telephone cannot find a free channel for the outgoing call, you will
hear a signal tone. You may be too far away from the base station or all channels
may be engaged.

AUTOMATIC CUT OFF AFTER 15 MINUTES

If the call lasts for longer than 15 minutes, you will hear an acoustic signal on the
handset and the call will be cut off. 30 seconds before being automatically cut off the
handset transmits a series of signal tones. To continue the call, press any button with the
exception of the
Note: This automatic call cut off is not activated in the factory. How to switch this
function on is explained in the chapter on programming.

EXCEEDING THE RANGE

If the maximum range is exceeded, the transmission quality degenerates and you will
hear warning signals on the handset. In this case, please move nearer to the base
station, as otherwise the call will be cut off.
button
.
and the required connection will be made.
button. The call can be continued for a further 15 minutes.
AUDIOLINE CDL 980G
button
. On entering
45