Adjusting The Base Station Volume; Touch-Tone (Ttd) Or Pulse (Pd) Dialling - AUDIOLINE CDL980G Bedienungsanleitung

PROGRAMMING

ADJUSTING THE BASE STATION VOLUME

The base station ringing tone can be set to three volume levels.
Press and hold the
Now set the required volume for the base station with the up and down arrows.
The display shows the messages:
r low
r medium
r loud
Release the

TOUCH-TONE (TTD) OR PULSE (PD) DIALLING

This feature enables you to use your telephone on analogue exchanges (PD) or on the
new digital exchanges (TTD). The factory setting is Touch-Tone Dialling (TTD).
Press the Save button
shows the current setting.
Now select which dialling mode you need to use for your installation:
1 = Pulse Dialling (PD – analogue)
2 = Touch-Tone Dialling (TTD – digital)
Press the Save button
button.
= soft
= medium
= loud
button.
and the 6 button on the number pad. The display
.
AUDIOLINE CDL 980G
51