Herunterladen Inhalt Inhalt Diese Seite drucken

T-Net Mode / Private Exchanges; R" Button On Private Exchanges; R" Button And The Deutsche Telekom T-Net; Setting The Flash Time - AUDIOLINE DECT 5600 SMS Bedienungsanleitung

Schnurloses digitales dect-telefon
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

8

T-NET mode / Private exchanges

You can use the "R" signal button (INT) on your telephone on private exchanges and
when using DEUTSCHE TELEKOM's T-Net functions.
8.1

"R" Button on Private Exchanges

If you have connected your telephone to a private exchange, you can use all the facilities
such as call transfer, automatic recall, etc. The "R" signal button gives you access to
these facilities. The FLASH time "100ms" will be required on a private exchange. You can
find out from the dealer from whom the equipment was purchased whether your
telephone will work on your private exchange without any problems. Due to the large
number of different private exchanges, it is not possible to guarantee this function.
8.2

"R" Button and the DEUTSCHE TELEKOM T-Net

Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM added
value functions (e.g. brokering, call waiting, three-way conference, etc.). The T-NET
works using the "FLASH 300ms" setting. Please contact DEUTSCHE TELEKOM to gain
access to T-Net functions.
8.3

Setting the FLASH time

1.
Press the
2.
Select the Setup menu by pressing
3.
Select the Recall function by pressing
4.
Select Recall 1 (100ms) or Recall (300ms) with
.
5.
Exit the entry mode by holding the
8.4

Outside line code

With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0") in order
to obtain a dialling tone for an outside line on the extension. With some, older private
exchanges, it takes some time before the dialling tone can be heard. Especially for these
private exchanges, an automatic pause can be inserted after connecting to the outside
line so that you can dial directly without waiting for the dialling tone. Two different
outside line codes can be entered.
Special note: If you have not connected your telephone to a private exchange or if your
private exchange works without a pause or without connecting to an outside line, please
do not enter any settings in this area.
62
- T-NET/Private exchanges -
button.
and confirm with
and confirm with
and
/
button pressed.
.
and confirm with

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis