Private Exchanges/T-Net; Outside Line Code - AUDIOLINE DECT 3000micro Bedienungsanleitung

AUDIOLINE DECT 3000micro
Select the required time in milliseconds by repeatedly
pressing the
Confirm the selection with
You can return to the main menu by holding the
button.
If you want to exit programming, please press the
button twice for one second.
6.4

OUTSIDE LINE CODE

With some private exchanges, it is necessary to dial a certain number (e.g. "9" or
"0") in order, after a short pause, to obtain a dialling tone for an outside line on the
extension. After being set up for your exchange, your AUDIOLINE DECT
3000micro automatically inserts a dialling pause when the outside line code is
detected. Three different outside line codes can be entered.
PLEASE FOLLOW THE INSTRUCTIONS:
Press the button as often as necessary until the
message "PABX SETTING" appears in the display.
Confirm the selection with
Now use the
memory locations you want to use to store an outside
line code.
Confirm the selection with
code has already been entered in this location, the
message "EMPTY" appears.
Now enter the required outside line code.
Confirm the selection with
You can return to the main menu by holding the
button.
If you want to exit programming, please press the
button twice for one second.
button or by using the arrow keys.
button to choose which of the three

PRIVATE EXCHANGES/T-NET

. If no outside line
DtMF or PULSE
FLASH TIME
User name
e.g. Multi 1
User name
e.g. Multi 1
Display shows:
PABX SETTING
PABX SET 1
PABX SET 1 to 3
e.g. EMPTY
e.g. 9
PABX SETTING
User name
e.g. Multi 1
User name
e.g. Multi 1
65