EN
20.4
Automatic unlocking of the lid after the centrifugation run
It can be set whether the lid should automatically unlock or not after the centrifugation run.
With the rotor at a standstill, this can be set as follows:
The procedure can be aborted at any time by pressing the
• Press and hold the button for eight
SELECT
seconds.
• Press the key until the following is
SELECT
displayed.
• Press the key.
START
PULSE
• Press the key until one of the following is
SELECT
displayed:
Lid AutoOpen : Automatic unlocking of
the lid after the centrifugation run.
off : Lid does not unlock automatically.
on : Lid unlocks automatically.
• With the keys, set off or on.
t
• Press the button to save the setting.
START
PULSE
• Press the key once to exit the "
STOP
OPEN
Settings"
menu or press twice to exit the "
MACHINE MENU ".
72/154
STOP
OPEN
key. In this case, the settings are not stored.
>RCF<
RPM
>RCF<
RPM
>RCF<
RPM
>RCF<
RPM
>RCF<
RPM
>RCF<
RPM
>RCF<
RPM
>RCF<
RPM
Rev. 08 / 12.2022
t/min:s
t/min:s
t/min:s
>RCF<
RPM
t/min:s
>RCF<
RPM
t/min:s
>RCF<
RPM
t/min:s
t/min:s
Example:
t/min:s
>RCF<
RPM
AB1203DEENFRIT
t/min:s
t/min:s
t/min:s
t/min:s