Hettich MIKRO 185 Bedienungsanleitung Seite 63

• Press the key.
SELECT
RPM : Speed.
RAD/mm : Centrifuging radius.
It is only possible to display and input the
centrifuging radius if the RCF display
( RCF ) is activated.

• Set the desired value with the keys.
t

• Press the key.
SELECT
R : Centrifuging radius.
RCF : Relative centrifugal force

• Set the desired value with the keys.
t

• Press the key.
SELECT
DEC : Brake stage.
fast : short run-out time.
slow : long run-out time.

• Set the desired value with the keys.
t

• Press the button to save the settings.
START
PULSE
AB1203DEENFRIT
Example:
RPM display (RPM)
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
Rev. 08 / 12.2022
EN
Example:
RCF display ( RCF )
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
RPM
>RCF< t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
>RCF< RPM t/min:s
63/154