Intended Use; Remaining Risks - Hettich MIKRO 185 Bedienungsanleitung

3

Intended use

The centrifuge MIKRO 185 is an in vitro diagnostic medical device according to the ln Vitro Diagnostic Medical
Devices Regulation (EU) 2017/746.
The device is used for centrifuging and enriching sample material of human origin for subsequent further processing
for diagnostic purposes. The user can set each of the variable physical parameters within the limits set by the device.
The centrifuge may only be used by qualified personnel in closed laboratories. The centrifuge is only intended for the
use referred to above. Intended use also includes observing all instructions in the Operating Manual and compliance
with the required inspection and maintenance work.
Any other use or use beyond this is considered improper. Andreas Hettich GmbH & Co. KG shall not be liable for any
damage arising from this.
4

Remaining risks

The device is built according to the state-of-the-art and the recognized safety regulations. If used and handled
improperly, there could be life-threatening danger to the user or third parties, or the device could be impaired or there
could be other property damage. The device is only to be used for its intended purpose and only when it is in safe
working condition.
Malfunctions which could affect safety must be corrected immediately.
AB1203DEENFRIT Rev. 08 / 12.2022
EN
51/154